New product launch

Blue-I SMART NRG Battery Operated Chlorine Analyser

SMART NRG is a battery operated water quality monitoring station that can be installed anywhere along the water distribution network measuring up to 6 water quality parameters, including free or total chlorine, pH, temperature, ORP, conductivity and turbidity as well as 2 operational parameters, including pressure and flow. It includes an internal data logger, as well as an internal 3G modem for 2-way communication.
Find out more
   
Chemitech Multiparametic Controller & Digital Sensors

Chemitec multiparametric controller and digital sensors provide customers a complete and flexible system for water treatment applications with easy to use software to collect, log and storing in-line measurement data.
Find out more
   
Lovibond Process Turbidimeters PTV 1000

Save time and water with the PTV Series. With no light bulbs to change, an easy to clean design and safe calibration procedures , it’s not hard to see all the ways you can save! The low volume flow body provides faster response to turbidity spikes and uses far less water and calibration standards. The PTV 1000 and PTV 2000 are designed to comply with ISO and EPA reporting regulations.
Find out more
   

Demo instrument on stand

TECTA B16 Automated Microbiology Tester

The TECTA™ B16 is a complete, self-contained automated microbiology testing system capable of providing laboratory-grade results on-site with unprecedented time-to-result performance.
Run Mode – Incubation and interpretation in 2-18 hours.
Read Mode – Interpretation of pre-incubated samples in 60 seconds.
Find out more
   
GE PT878 Portable Ultrasonic Liquid Flow Meter

The TransPort PT878’s patented Correlation TransitTime™ digital signal processing (DSP) technique greatly increases its signal-to-noise ratio for accurate, drift-free flow measurement in liquids that contain a second phase of entrained solids or gas bubbles.
The TransPort flowmeter operates in these and other difficult applications where conventional transit-time flowmeters fail.
Find out more
   
bbe FluoroProbe (chlorophyll)

The FluoroProbe III is a depth profiler for the
rapid detection of chlorophyll-a in phytoplankton. This is helped by a determination of yellow substances and an automatic correction. The spectral characteristics of yellow substances are stored in the FluoroProbe III and can be adapted to a specific location when necessary.
Find out more
     
BIOGAS 3000 fixed biogas analyzer

ATEX certified, the new fixed biogas analyser for landfill and anaerobic digestion sites builds on field-proven, robust gas analysis technology to offer cost effective online monitoring.
Find out more
     
Thermo Scientific™ Orion™ AQ4500 Turbidity Meter

The AQUAfast AQ4500 turbidimeter is the only advanced completely waterproof turbidimeter with a rating of IP67. It can log 100 data points that can later be downloaded to a printer or computer.
Find out more
     
Thermo Scientific™ Eutech™ CON 450 Conductivity Meter

Backlit, rugged waterproof meter for Conductivity / Total Dissolved Solids / Salinity / Temperature Measurements.
Find out more
     
Lovibond® MD100 photometer

Designed for industrial water quality analysis, MD100 series meters ensure the efficiency and operational safety of cooling and boiler water systems.
Find out more
     

Lovibond® MD610 photometer

The very popular Lovibond® MD 600 series has been further enhanced. The new photometer enjoys the same popular, portable style of the MD 600 and incorporates all the same technology. Additionally, now, the MD Series includes a Bluetooth inferface for connection to smart phones and tablets to connect to iOS® and AndroidTM app for data management and email delivery.
send enquiry 

     
Lovibond® EComparator Series

With robust casing and a small laboratory footprint, the EComparator Series is the ideal solution for users wishing to
experience the benefits of immediate, accurate, electronic readings from colour measurements.
Find out more
   
In-Situ AquaTROLL 600 + MACE water flow logger

This flexible, data-ready sonde easily integrates with telemetry systems and our new HydroVu Data Services platform for real-time feedback on all your remote water monitoring sites.
Find out more
 
Integrated Flow Meter with Data Logger Kit

Including AT600 flowmeter with ultrasonic transducers and clamp-on fixtures, DT82E environmental data logger with programmable logging interval, internal battery last approximately 2 weeks without charging/
rechargeable via external solar panel or 240Vac mains adapter. All sit safetly in a weather proof
case. Telemetry option is available.
send enquiry 
   
OdaLog® Type L2 Portable Gas Monitor

L2 is specifically designed to withstand harsh environments typically found in the Wastewater Industry. Its purpose is to monitor gas levels to help control H2S gas in sewerage systems and treatment plants for later review and evaluation using OdaStat-G software.
Find out more
 
Thermo Scientific™ Oxoid™ Chromogenic Coliform Agar

Enumerate and differentiate coliforms and Escherichia coli in water samples with Thermo Scientific™ Oxoid™ Chromogenic Coliform Agar in accordance with ISO 9308-1 guidelines for water quality analysis. Target organisms are easy to differentiate, E.coli forming dark blue/violet colonies and coliforms pink to red colonies. Achieve complete detection within 24 hours, removing the need for subculturing.
Find out more
   
Thermo Scientific™ Orion™ Star A329 pH/ISE/Conductivity/DO Portable Multiparameter Meter

Evaluate samples in the most demanding locations using this waterproof meter with IP67-rated housing. Use the three channels to measure pH, conductivity and DO simultaneously or view each channel separately. Log up to 5000 data point sets with time / date stamp and transfer to a printer or computer.
Find out more
 
Eutech PCSTestr 35

Ideal for quick and accurate pH checks in pools and spas, aquariums and hydroponics operations, or anywhere frequent pH testing is required.
Find out more
   

Thermo Scientific™ Eutech™ Expert Series Waterproof Testers

The Expert CTS Tester is designed for on-the-go measurements of conductivity, TDS, salinity, and temperature. It is best used in applications such as hydroponic gardening, aquaculture, agriculture, pools, cooling towers, and more!
Find out more
 
 
 
 
 
 
 

Contact Us















Contact Us