We offer instruments for both general ground water resource monitoring and contaminated site assessment. Water level meters are a reliable ‘on the spot’ indicator of distance to the water table whilst oil-water interface meters enable field staff to determine the extent of contamination of hydrocarbon-impacted ground water. Long-term water level monitoring is a breeze using our In-Situ combined pressure transducers and data loggers.
IP Dipper Pro Interface Meter
The IP Dipper Pro is an interface meter used to accurately measure the thickness of floating or sinking hydrocarbon products in groundwater. It features a slim 16mm probe and is ideal for wells, piezometers and direct push equipment as narrow as 19mm ID.
The probe and tape will withstand hydrocarbons, solvents and other contaminants. Detects and measures LNAPL (foating) and DNAPL (sinking) hydrocarbons in groundwater. Slim 5/8in. (16mm) field replaceable stainless steel probe. Probe has a non removable 3/4in. (19mm) protector fitted as standard. Able to measure product layer as thin as 1mm.
Easy to read accurate (ASME Standard) Kynar® jacketed tape with stainless steel conductors. Graduation 1mm. Standard tapes are printed beneath the jacketing. The print never wears off.
Easy change single 9v battery. Includes tough nylon carry bag and a comprehensive cleaning kit. Certified intrinsically safe to CSA and ANSI/UL standards. Class 9098-01 for hazardous locations. Class 9098-81 (USA) for hazardous locations. Class I groups A, B, C and D...Request More Information
Heron H.OIL Interface Meter
Heron’s interface meter is an economical unit that will measure to 20m below the top of the well, making it ideal for shallow wells or high water tables.
The H.Oil interface meter measures the thickness of floating or sinking layers of hydrocarbon products in the groundwater.
Many of these instruments are used by refineries, oil spill and remediation companies, land fills and site clean up projects.
Certified intrinsically safe (CSA & ANSI/UL)Class 9098 01 hazardous locations,Class 9098 81 Hazardous locations(USA), Class I groups A, B, C and D...Request More Information
Solinst Model 122 Interface Meter
The Model 122 Oil/Water Interface Meters give accurate measurements of product level and thickness in wells and tanks.
Determination of both floating non- aqueous liquids (LNAPL) and sinking non-aqueous liquids (DNAPL) is quick and easy. The 5/8” (16 mm) diameter P1 probe allows easy access through tight spaces and into narrow wells. A steady light and tone indicate product. Water is indicated by intermittent signals...Request More Information
Aqua Dipper Pro
The Aqua Dipper Pro water level meter has been designed to provide a long and reliable service life to consultants globally.
Accuracy begins with a top quality, heavy duty tape. Each tape is tested to ensure compliance with appropriate ASME standards. These tough tapes have a breaking load of over 150 Kg.
The tape is made from high tensile steel, ensuring resistance to stretching even at abnormal loads. Everything on the unit from the ergonomic vinyl carry handle to the easy clean, full depth stainless steel probe has been carefully designed to give you the very best water level meter with ease....Request More Information
Heron Dipper T Water Level Meter
The Heron Instruments manufactured Aqua Dipper is a tough economical water level meter.
The Kevlar tape - reinforced polyethylene dog bone section with stainless steel conductors. The low cost and durability of the tape make it an ideal choice for well drillers and pump installers.
The Probe: 16mm (5/8in.) diameter 19mm (7 ½in.) long probe constructed from stainless steel and Tefon®. The probe has no holes or recesses to trap contaminants and is water tight to the full depth of the tape. Supplied with a drawstring slip cover...Request More Information
Solinst Model 101 Water Level Meter
Provides accurate water level measurements in wells, boreholes and standpipes. The Model 101 Water Level Meter is the most accurate and reliable of the Solinst meters. It is easy to operate and marked each millimeter. The Model 101 Water Level Meter uses the P6 pressure proof probe, attached to a permanently marked polyethylene tape, fitted on a well- balanced reel.
The simple design is easy-to-clean, and hangs straight in wells. It is powered by a standard 9 volt battery housed in an easy-access battery drawer...Request More Information
In-Situ LevelTROLL® 500 - water level logger vented or non-vented [various ranges available]
The Level TROLL® contains everything needed for water level measurement and data logging--level and temperature sensors, a data logger, internal power in a 18.3mm (0.72 in) diameter housing with a lot of exciting new capabilities.
Since it is built entirely from rugged titanium that is welded to eliminate o-ring seals, you can have total confidence in all applications, even marine environments. The Level TROLL® is the easiest way to monitor level ever!
With the Level TROLL®, you'll discover perfect connections with our new Twist-Lock connectors. And, they are extendable--an industry first! Forget having to change batteries.
Our new super low-power system guarantees long-term operation plus the unit can be powered with external power. System integration is easy with built-in RS-485/232 Modbus, SDI-12, and 4-20mA communication capability...Request More Information
In-Situ BaroTROLL® 500 - for use with non-vented LevelTROLLs
The BaroTROLL® is a low-cost, self-contained logger that is used to measure barometric pressure. It contains high precision barometric and temperature sensors, a data logger, and internal power in a 18.3mm (0.72 in) diameter housing.
There is no need to change batteries with our new super low-power system that guarantees long-term operation. Alternatively, the unit can be powered with external power. System integration is a snap with built-in RS-485/232 Modbus, SDI-12, and 4-20mA communications.
The BaroTROLL® is typically used in conjunction with one or more of the non-vented Level TROLL® to compensate for changes in the water level due to barometric fluctuations. Readings from the BaroTROLL® can be automatically subtracted from data from the Level TROLL®.
Due to its small size, it can be installed at the surface or inside the well casing--even in 25mm (1 in) wells! Since it is built entirely from rugged titanium that is welded to eliminate o-ring seals, you can have total confidence in tough environments...Request More Information
